带 80 微米铝箔的酚醛管道面板
厚度 : 20 / 25 / 30 / 40 毫米
面向 : 80 / 80 微米压花
面层材料 : 银色/银色铝箔
密度 : 40 - 60 千克/立方米
尺寸 : 3.95/2.95 米×1.2 米,10 张用塑料薄膜包装
类别 预绝缘暖通空调管道面板
标签 酚醛管道面板, 酚醛泡沫隔热材料, 预绝缘管道面板
电子邮件地址:[email protected]
带 80 微米铝箔的酚醛管道面板
GFI Phenolic Duct Panel is extensively utilized in Central Air Conditioning Duct systems. It features a 20mm thick closed-cell Phenolic Foam 并与 80 微米厚的银色或黑色铝箔层压在一起。铝箔的两面都有压花,并涂有一层 2 克/平方米的耐腐蚀环氧清漆。 酚醛管道面板 是一种防火板。
GFI 还生产 酚醛预绝缘管道 不同厚度的面板,包括 10 毫米、15 毫米、20 毫米、25 毫米、30 毫米和 40 毫米。铝箔的 酚醛泡沫板 可定制不同厚度,以满足特定要求。
这 Phenolic Foam Ducting 确保了卓越的热性能和耐用性,使 酚醛预绝缘管道 是高效暖通空调管道系统的理想选择。
技术数据表
泡沫密度 |
千克/立方米 |
40 或 60 |
铝箔厚度 |
微米 |
80 |
导热性 |
瓦/米.千瓦 |
0.02 |
防火等级 |
|
BS 476 第 6 和第 7 部分 0 级 ASTM E-84 A 级 |
抗压强度 |
Mpa |
0.25 |
弯曲强度 |
Mpa |
2 |
吸水性 |
% |
0.25 |
尺寸变化 |
% |
0.3 |
最大风速 |
米/秒 |
13-20 |
最高运行温度 |
℃ |
120 |
酚醛预绝缘泡沫管道板的应用
GFI Phenolic Foam Duct Panel with both sides aluminum foil is commonly used in heating, ventilation, and air conditioning (HVAC) duct systems in places such as shopping malls and office buildings. These lightweight GFI duct boards offer excellent thermal insulation, making them ideal for both residential and commercial applications. They enhance energy efficiency by minimizing heat loss during air distribution in buildings, factories, and cold storage facilities.
In addition to Phenolic Foam Ducting, GFI also provides PIR pre-insulated duct and Phenolic pre-insulated duct options, which offer superior thermal performance and durability for various HVAC needs.
为什么选择 GFI 酚醛预绝缘管道面板?
01 / GFI 酚醛管道板导热系数低,保温性能好。GFI 酚醛泡沫保温风管板的导热系数约为 0.018-0.022W/(m-k),是所有保温材料中最低的。
02 / GFI Phenolic Foam Ducting is fire-resistant and high-quality insulation materials. GFI Phenolic Duct Panel will form a layer of char on its foam surface when burning, which helps isolate the foam underneath. This char layer effectively prevents flame spread, and does not produce harmful gases when burning.
03 / GFI 酚醛预绝缘风管具有防潮、防水和抗菌特性。
04 / 与普通金属管道系统相比,GFI 预绝缘风管用酚醛泡沫板有许多优点,如重量更轻、强度更高、更耐用、效率更高。
05 / GFI 工厂可生产不同的面材,以满足不同的要求和应用。它广泛应用于中央空调的各种通风系统。

制作 GFI 酚醛泡沫板风管
GFI 酚醛泡沫风管的制造是通过 GFI 预绝缘风管工具箱或数控切割机按照标准化程序完成的。无论风管元件的形状如何,其流程都是相同的:描画、切割、粘合、折叠、粘贴、翻边、加固和密封。
包装和运输
GFI 酚醛风管板的长度和包装可以定制。通常情况下,它将按以下细节进行切割和包装:
01 / 40'HQ 集装箱:3950/2950*1200*20mm,一箱装 10 张,共 660 张(3950mm)/ 880 张(2950mm)。
02 / 20'GP 容器:2900*1200*20 毫米,一箱装 10 张,共 400 张。
